Gloss Retention Procedures

Share this article:

Gloss retention is reliant on the equipment being used. The operation of the autoscrubber and burnisher, the dust mop, and the selection of the proper cleaner, can all impact the longevity of a floor care program. An important factor to consider is the variables between staff and the technique used to apply floor finishes.

learn-more-hardfloor-program
demo-hardfloor-programbrochure-hardfloor-program

For example, let’s say that there are three different cleaning staff members applying the same floor finish. The first one applies the coats very thin. At the end of the day there are only two coats, instead of six coats applied. Each of the coats covered at 6,000 square feet per gallon, producing a very thin coat. The second person applies medium coats, each at 1,500 – 2,000 square feet per gallon. This results in better looking floors for a longer amount of time. The third person applies heavy coats, each at 800 – 1,000 square feet per gallon. Since the coats are so heavy they take a very long time to dry tack-free. The residual moisture and solvents in floor finishes can take months to fully evaporate out of the film. This extremely long time to cure means an unusually soft coating that doesn’t wear well.

Even though each person used the same floor finish, they each ended up getting different results. The Buckeye® Floor Care Program includes a comprehensive training program for your staff to ensure the products are being used correctly and efficiently. The program can be tailored to meet your specific needs and Buckeye is dedicated to providing the most extensive customer support.

Leave a Reply

Your email address will not be published. Required fields are marked *